The TAP Test Access Point is a device that looks like a three-way! Connects to the network and sends the data being exchanged to the network traffic analyzer. The TAP system simultaneously transmits incoming and outgoing data over the dedicated channel.
Ensures the receipt of data by the monitoring system instantly and at the same time redirects all-optical traffic to the Monitoring.
Passive Monitoring TAPs are a set of optical fibers that have a unique capability by branching off from the main optical signals and receiving the minimum optical power. Dividing TAPs perform well without the need for a power supply, and Network operators also have full Duplex monitoring of Multimode (mm) and Single mode (SM) optical fibers for 1GB, 10GB, 40GB, and 100GB connections.
The benefits of this system include high port density, increased network visibility (Monitoring), reduced response time to security incidents, and up to 80% cost savings and ongoing operating costs when combined with Monitoring’s Distribution Traffic.
This system has a combination of monitoring output ratios.
The highly reliable construction of this device ensures maximum continuity of communication.
Advantages
- Eliminates the possibility of drop packets
- The monitoring device receives all packets, including physical errors
- You can monitor Full-duplex networks
- Ability to implement and produce for different types of optical networks with different coefficients
- Create a structure and firewall to prevent cyber attacks
Disadvantages
- The monitoring device may require a Dual-Receive capture interface
- It is not possible to monitor the traffic inside the switch
Mechanical
Total Weight:
5 lb. / 2.300 kg.
Dimension
17.3” (w) x 12.5” (d) x 1.75” (h) / (440mm x 300 mm x 45mm) 1RU High, Fits standard 19” Rack, 21” Deep
Fiber Network Ports:
X3 ~ x18
Fiber Monitor Ports:
X6
Split Ratio:
90:10
80:20
70:30
60:40
Wavelength
Insertion Loss (dB)
Net
Mon
Net
Mon
Net
Mon
Net
Mon
850nm
< 1.3
< 10.8
< 1.9
< 8.0
< 2.0
< 6.0
< 3.3
< 4.2
1310/1550nm SM
< 0.6
< 10.5
< 1.0
< 7.3
< 1.7
< 5.5
< 2.5
< 4.1
Performance
Full line rate:
2 - 960 Gbps
Environmental
Operating Temperature
0 ~ +55 c
Storage temperature
-20 ~ 100 c
Humidity:
5% – 95%, non-condensing
Data
Rates:
All speeds up to 40 Gbps
Types:
All Optical*
Propagation Delay
Network to Network
< 3.2ns
Network to Monitor
< 3.2ns
TAP Interface
Speed Duplex
Full duplex 100Gb, 40Gb, 10Gb, 1Gb, fiber links
Fiber Types
SM (9/125 micron) for 1310nm or 1550nm wavelength
MM (62.5/125micron) for 850nm wavelength
Connector Types
LC for all network and monitor ports
Tap single-mode type
Part number
TAP SINGLE MODE 50-50
DMPTS00005050
TAP SINGLE MODE 10-90
DMPTS00001090
TAP SINGLE MODE 20-80
DMPTS00002080
TAP SINGLE MODE 30-70
DMPTS00003070
TAP SINGLE MODE 40-60
DMPTS00004060
TAP SINGLE MODE 25-25-50
DMPTS00252550
TAP SINGLE MODE 20-20-60
DMPTS00202060
Tap multi-mode type
Part number
TAP MULTI MODE 50-50
DMPTM00005050
TAP MULTI MODE 10-90
DMPTM00001090
TAP MULTI MODE 20-80
DMPTM00002080
TAP MULTI MODE 30-70
DMPTM00003070
TAP MULTI MODE 40-60
DMPTM00004060
TAP MULTI MODE 25-25-50
DMPTM00252550
TAP MULTI MODE 20-20-60
DMPTM00202060
Technical Data Sheet Technical Data SheetPopular03/08/1400 20:21:1451.06 KB
